ShiftBuzz v0.9
==============

Adapted by Nick Aronson from Vladimir Kadlec's GI program.

Instructions
------------

1. Extract the ZIP
2. Setup your LFS cfg.txt file (see below)
3. Run ShiftBuzz.exe and LFS (in any order).

You can change the Buzz.wav file for a sound of your choice.

LFS configuration
-----------------
ShiftBuzz expects that LFS is configured to report "Dashboard Packets".
Change the following in cfg.txt file (in the LFS directory).

OutGauge Mode 1        :0-off 1-driving 2-driving+replay
OutGauge Delay 10      :minimum delay between packets (100ths of a sec)
OutGauge IP 127.0.0.1  :IP address to send the UDP packet (127.0.0.1 is the computer that is running LFS)
OutGauge Port 11111    :IP port

(the full description is in <LFS dir>/doc/InSim.txt)

Run ShiftBuzz.exe to start.

ShiftBuzz configuration
-----------------------
In the ShiftBuzz config.txt you can change the default IP and port from the values above if you wish. If you do, remember to change them in the LFS cfg.txt file too.

